Video Gallery

How to create the wheels for a dragster using Tinkercad.com?

Go to Video Gallery Added Mar 04, 2021 •

Copy this URL:
Embed code:	<iframe class="edlio-embed-player" type="text/html" width="640" height="360" src="//www.thomasedisonms.org/apps/embed/?v=311598" frameborder="0" allowfullscreen></iframe> Change dimensions

Go HD

Show Transcript

Hello students in this video I will show you how to do the wheels for the dragster so we first have to open up our browser and school tinkercad.com if we need to know the specifications for a dragster so let's open up our CO2 dragster design and here we have our specifications the rear with rear wheel diameter 1 3/16 to 1 and 9/16 salsa diameter so we can use a number in between so I'm going to use to bring in the cylinder and cylinder so we're going to put in 1.5 that's one and a half inches so we also have to just too high to make it a perfect circle 1.5 now so that's the banner not for the West we have to use the Wiz Houston 9/16 to 11/16 so 9/16 is equivalent to 0.5 625 1625 and that's double the size of our rear wheel now the wheel needs to have a an axle hole here so the axle hole has to be 1/8 of an inch to create the alcohol limit bringing the cylinder with the whole thing that in and we're going to rotate that Challenger my rotated 90 degrees then so so diameter has to be 1/8 of an inch so 0.125 that's 1/8 of an inch so we need to also to make a perfect circle to make it 0.1 to  1/8 of an inch but I will bring the larger cylinder in make sure that 2018 Challenger goes through the term larger wheel with now we're going to select both objects we're going to use the Align to so that we can align the axle hole to the wheel so we're going to look at the horses on click on the horizontal right in the center. Center the axle hole horizontally and then click on the center. Vertically so now we have our Acts call center right in the middle and now we just to let the group function here or Control G and they're so our wheel now has the axle hole right in the middle they're so this is the size for the rear wheel so we need to so I'm going to click on a duplicate soon now we have two wheels one for the back two for the back and now we need our front wheels I'm just going to use the rear wheel implicated and then just adjust the measurements for the front wheel so for the front wheel these are our measurements the front wheel diameter has to be one and a quarter inch so right now this one is 1 and 1/2 so 1 and 1/4 would be 1.25 and then adjust this measurement here to make it a perfect circle on .25 on the recorder so now that makes our diameter 1 and 1/4 inches now the whiskey right now it's a 9/16 so we want to change that and we can have our measurement be 1/16 to 3/16 something to use 1/8 1/8 of an inch equals 0.125 and there so now I'm going to duplicate that

Uploaded by Alberto Arias.

Video Gallery

How to create the wheels for a dragster using Tinkercad.com?

Popular Videos